Preview of allfloorsanding.com. Search engines are kept out, and an ask here is answered with where it would go, never kept.
All Floor Sanding
Menu

Floor sanding and refinishing in Washington Crossing, NJ

About half of Washington Crossing’s 149 homes were built in the 1940s and 50s, when narrow solid oak strip was the usual floor, much of it later covered with carpet.

We are not in Washington Crossing yet. Leave your details and we will reach out if we start working there.

We see the floor before we price it, so the price you get is the price.

Homes in Washington Crossing

Washington Crossing has 149 homes, and the typical one was built around 1954. Nearly all are lived in by their owners, and about four in five are detached houses.

Homes
149
Lived in by their owners
100%
Detached houses
81%
Typical year built
1954
Built before 1980
81%

U.S. Census Bureau, American Community Survey 5-year estimates, 2020 to 2024.

Before 194044 30%
1940snone counted
1950s76 51%
1960snone counted
1970snone counted
1980snone counted
1990s29 19%
2000snone counted
2010snone counted
Since 2020none counted
Homes in Washington Crossing by the decade they were built. U.S. Census Bureau, American Community Survey 5-year estimates.

The floors you are likely standing on

Homes from the 1940s and 50s were usually floored in 2 1/4 inch solid red oak strip over plank subfloors. Under carpet it is often almost new, with tack strip holes along the walls and staples to pull. A full sanding takes it back to bare wood, and three coats protect it for years. Homes built before 1940 usually have solid oak strip (2 1/4 inch is typical), and the oldest have heart pine or fir. Homes from the 1980s and 90s usually have 2 1/4 or 3 1/4 inch solid oak, finished on site, in the main rooms.

In a home built before 1978, a painted floor, painted stair risers or old baseboard paint may contain lead. Say so when you ask: sanding paint is work for a pro certified under the EPA Renovation, Repair and Painting rule.

Colors to start with

Every DuraSeal color

How it works

  1. Tell us about the floor. Where it is, what it needs, roughly how much, and when. About a minute.
  2. We keep your details. We are not in this area yet, so we say so now and keep your request, never sold or shared.
  3. We reach out if we start working here. Only All Floor Sanding, and only about your floor.

Questions about floors in Washington Crossing

Can the floors in my home in Washington Crossing be sanded?

Usually. Solid oak in homes built in the 1940s and 50s usually has wood above the tongue for several sandings. The exceptions are floors sanded too often already, where nail heads or the tongue show, and those can often be repaired board by board.

How long does it take?

A few rooms are usually sanded and coated in two to three days with a waterborne finish, three to four with an oil-modified one. Light foot traffic is fine after a day, furniture after two or three, rugs after about two weeks.

Can I change the color?

Yes. Oak takes stain well, from the palest naturals to near black. A pro can lay sample patches on your own sanded floor so you choose in your own light. Browse every DuraSeal color on this site first.

Do you work on my street?

Not yet. Leave your details, and we will reach out if we start working in Washington Crossing.