Floor sanding and refinishing in Clearbrook, NJ
Most of Clearbrook’s 1,868 homes are attached: rowhouses, townhouses and apartment buildings. More than half of all Clearbrook’s homes were built in the 1960s and 70s. Older homes often have oak strip or parquet under decades of finish.
Homes in Clearbrook
Clearbrook has 1,868 homes, and the typical one was built around 1977. About nine in ten are lived in by their owners.
- Homes
- 1,868
- Lived in by their owners
- 91%
- Detached houses
- 25%
- Typical year built
- 1977
- Built before 1980
- 62%
U.S. Census Bureau, American Community Survey 5-year estimates, 2020 to 2024.
The floors you are likely standing on
Homes from the 1960s and 70s usually have solid oak strip in the living and dining rooms and hallways, parquet in some foyers and dens, and carpet over oak in bedrooms. Parquet sands differently from strip because the grain runs both ways, so it is worth saying which you have. Homes from the 1980s and 90s usually have 2 1/4 or 3 1/4 inch solid oak, finished on site, in the main rooms.
In an apartment or condo building, the building often sets work hours and asks for dust containment. Say so when you ask, and ask for a dust-free system.
In a home built before 1978, a painted floor, painted stair risers or old baseboard paint may contain lead. Say so when you ask: sanding paint is work for a pro certified under the EPA Renovation, Repair and Painting rule.
Colors to start with
How it works
- Tell us about the floor. Where it is, what it needs, roughly how much, and when. About a minute.
- We keep your details. We are not in this area yet, so we say so now and keep your request, never sold or shared.
- We reach out if we start working here. Only All Floor Sanding, and only about your floor.
Questions about floors in Clearbrook
Can the floors in my home in Clearbrook be sanded?
Usually. Solid oak in homes built in the 1960s and 70s usually has wood above the tongue for several sandings. The exceptions are floors sanded too often already, where nail heads or the tongue show, and those can often be repaired board by board.
How long does it take?
A few rooms are usually sanded and coated in two to three days with a waterborne finish, three to four with an oil-modified one. Light foot traffic is fine after a day, furniture after two or three, rugs after about two weeks.
Can I change the color?
Yes. Oak takes stain well, from the palest naturals to near black. A pro can lay sample patches on your own sanded floor so you choose in your own light. Browse every DuraSeal color on this site first.
Do you work on my street?
Not yet. Leave your details, and we will reach out if we start working in Clearbrook.
